Are you in search of a reputable online distributor that can reliably source and ship top-notch military and defense parts, NSN parts, and aerospace parts? If so, we have you covered on Buy Mil-NSN Parts with our unrivaled inventory of offerings. Thank you for taking an interest in part number VRB15-20-4A30, a Vernitron Corp item that is listed alongside the description “Resolver Electrical” and the NSN 5990001029600. If you would like to learn more about this particular listing, you can always take the initial step of the procurement process via the submission of the quote request form on this page.
Note : We Will Not Share Your Information To Any Third Parties.
We organize our offerings in a variety of ways to make the search process simple for part number VRB15-20-4A30 and other similar items. For instance, this Vernitron Corp product is listed alongside the NSN 5990-00-102-9600, and it falls under Federal Supply Class (FSC) 5990 Synchros and Resolvers. Furthermore, through our rigorous vetting processes, careful part inspections, document verification practices, and more, we have established ourselves as a trusted distributor operating with AS9120B, ISO 9001:2015, and FAA AC 00-56B accreditation. With all of this in mind, begin the procurement process for part number VRB15-20-4A30 from CAGE Code 10651 on our website, and see why so many customers steadily depend on Buy Mil-NSN Parts for the NSN products they require.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-102-9600 Item PartTypeName: RESOLVER,ELECTRICAL | 5990 | 001029600 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | 0 | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| VRB15-20-4A30 | 5 | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | STEEL,STAINLESS |
| AAQL | BODY STYLE | STANDARD ROUND B |
| AAVH | SHOULDER DIAMETER | 1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.6745 INCHES MINIMUM AND 0.6750 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.6590 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 1.4320 INCHES MINIMUM AND 1.4390 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0950 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0750 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1870 INCHES MINIMUM SINGLE SHAFT AND 0.1872 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.5400 INCHES NOMINAL SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 15 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 5.0 MINIMUM AND 26.0 MAXIMUM |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 480.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 320.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 390.00 NOMINAL |
| AJTX | COMPENSATION METHOD | WINDING COMPENSATED |
| AJVC | COMPENSATOR DC RESISTANCE IN OHMS | 520.00 NOMINAL |
| AJVD | COMPENSATOR TRANSFORMATION RATIO IN PERCENT | 0.990 ROTOR TO COMPENSATOR NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 8.500 INPUT TO OUTPUT NOMINAL |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 15.00 OUTPUT |
| AJVJ | INTERAXIS ERROR ANGULAR RANGE IN MINUTES | -5.0 TO 5.0 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -0.1 TO 0.1 |
| AJVM | SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | 0.0400 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.1320 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.7870 INCHES NOMINAL |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| AKAN | SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | 0.2000 INCHES NOMINAL SINGLE SHAFT |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 2500.00 NOMINAL |
| CRSJ | SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.1120 INCHES NOMINAL |
| CSJY | TRANSFORMATION RATIO | 0.980 ROTOR TO STATOR NOMINAL |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 1.1000 INCHES NOMINAL |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.190 INCHES SINGLE SHAFT |
| TTQY | TERMINAL TYPE AND QUANTITY | 12 SCREW |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
