Are you in search of a reputable online distributor that can reliably source and ship top-notch military and defense parts, NSN parts, and aerospace parts? If so, we have you covered on Buy Mil-NSN Parts with our unrivaled inventory of offerings. Thank you for taking an interest in part number 1292035-101, a Triumph Aerostructures Llc item that is listed alongside the description “Bearing Roller Rod End” and the NSN 3110003165560. If you would like to learn more about this particular listing, you can always take the initial step of the procurement process via the submission of the quote request form on this page.
Note : We Will Not Share Your Information To Any Third Parties.
We organize our offerings in a variety of ways to make the search process simple for part number 1292035-101 and other similar items. For instance, this Triumph Aerostructures Llc product is listed alongside the NSN 3110-00-316-5560, and it falls under Federal Supply Class (FSC) 3110 Bearings Antifriction Unmounted. Furthermore, through our rigorous vetting processes, careful part inspections, document verification practices, and more, we have established ourselves as a trusted distributor operating with AS9120B, ISO 9001:2015, and FAA AC 00-56B accreditation. With all of this in mind, begin the procurement process for part number 1292035-101 from CAGE Code 80378 on our website, and see why so many customers steadily depend on Buy Mil-NSN Parts for the NSN products they require.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-316-5560 Item PartTypeName: BEARING,ROLLER,ROD END | 3110 | 003165560 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1292035-101 | 6 | 2 | 7 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | 0.7500 INCHES NOMINAL |
| AAZF | SHANK STYLE | EXTERNALLY THREADED |
| ABHP | OVERALL LENGTH | 5.7650 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| AGGY | SHANK THREAD LENGTH | 2.5500 INCHES MINIMUM AND 2.5700 INCHES MAXIMUM |
| AGVT | OUTER RING WIDTH | 0.8850 INCHES MINIMUM AND 0.8950 INCHES MAXIMUM |
| AGVU | INNER RING WIDTH | 1.2450 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 4.5000 INCHES NOMINAL |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| AKVV | INTERNAL CLEARANCE | 0.0006 INCHES MINIMUM RADIAL AND 0.0014 INCHES MAXIMUM RADIAL |
| CBBL | FEATURES PROVIDED | LUBRICATION HOLE AND LUBRICATION GROOVE AND EXTERNAL LUBRICATION FITTING |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES |
| CTLK | SELF-ALIGNMENT ANGLE | 8.00 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | PLATING ON EXTERNAL SURFACES OF BEARING,ROLLER ONLY |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | COPPER ALLOY RETAINER |
| MATT | MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEAL |
| MATT | MATERIAL | STEEL COMP 4140 OUTSIDE WASHERS |
| MATT | MATERIAL | STEEL COMP 4140 SLEEVE |
| MATT | MATERIAL | STEEL COMP 4340 ROD END BODY |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MATT | MATERIAL | STEEL COMP E52100 OUTER RING |
| MATT | MATERIAL | STEEL COMP E52100 ROLLER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OUTSIDE WASHERS |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE ROLLER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE SLEEVE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY |
| SFTT | SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES |
| STYL | STYLE DESIGNATOR | DOUBLE ROW,CONCAVE ROLLERS |
| TEST | TEST DATA DOCUMENT | 36659-LC72-1076 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTIN |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
