Are you in search of a reputable online distributor that can reliably source and ship top-notch military and defense parts, NSN parts, and aerospace parts? If so, we have you covered on Buy Mil-NSN Parts with our unrivaled inventory of offerings. Thank you for taking an interest in part number 299-0070, a Gkn Aerospace Inc item that is listed alongside the description “Shaft Axle Automotive” and the NSN 2520014743901. If you would like to learn more about this particular listing, you can always take the initial step of the procurement process via the submission of the quote request form on this page.
Note : We Will Not Share Your Information To Any Third Parties.
We organize our offerings in a variety of ways to make the search process simple for part number 299-0070 and other similar items. For instance, this Gkn Aerospace Inc product is listed alongside the NSN 2520-01-474-3901, and it falls under Federal Supply Class (FSC) 2520 Vehicle Power Transmission Components. Furthermore, through our rigorous vetting processes, careful part inspections, document verification practices, and more, we have established ourselves as a trusted distributor operating with AS9120B, ISO 9001:2015, and FAA AC 00-56B accreditation. With all of this in mind, begin the procurement process for part number 299-0070 from CAGE Code 62826 on our website, and see why so many customers steadily depend on Buy Mil-NSN Parts for the NSN products they require.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2520-01-474-3901 Item PartTypeName: SHAFT,AXLE,AUTOMOTIVE | 2520 | 014743901 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| EX4855-2 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUB | HOLE DIAMETER | 0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 29.770 INCHES MINIMUM AND 30.240 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | NSN 2320-01-412-0143 TRUCK, UTILITY - HUM-V |
| AHTC | FLANGE OUTSIDE DIAMETER | 2.948 INCHES MINIMUM AND 2.952 INCHES MAXIMUM |
| AMDM | FIRST END SPLINE LENGTH | 3.210 INCHES MINIMUM AND 3.250 INCHES MAXIMUM |
| AMGA | SECOND END SPLINE LENGTH | 3.210 INCHES MINIMUM AND 3.250 INCHES MAXIMUM |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 1.282 INCHES NOMINAL |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 1.375 INCHES NOMINAL |
| AMGF | SECOND END PITCH DIAMETER | 0.071 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| AMHF | SECOND END GEAR OUTSIDE DIAMETER | 1.375 INCHES NOMINAL |
| AMQA | FIRST END TYPE | FLANGED |
| AMQF | SECOND END TYPE | SPLINED |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 6 UNTHREADED HOLE |
| BNTH | SECOND END GEAR TEETH QUANTITY | 32 |
| BNTJ | SECOND END GEAR TEETH PRESSURE ANGLE IN DEG | 45.0 |
| BNTM | SECOND END SPLINE TYPE | INVOLUTE |
| BNTN | SECOND END SPLINE PRESSURE ANGLE IN DEG | 45.0 |
| BNYS | FLANGE OVERALL THICKNESS | 0.303 INCHES MINIMUM AND 0.355 INCHES MAXIMUM |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | ITEM FOR RIGHT HAND ONLY; SURFACE HARDNESS ROCKWELL C 58-63 - CORE HARDNESS ROCKWELL C 35 MAX; MAT'L FOR BOOT CLAMP - STAINLESS STEEL, TYPE 304 IAW ASTM A167 |
| AAUB | HOLE DIAMETER | 0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 29.770 INCHES MINIMUM AND 30.240 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | NSN 2320-01-412-0143 TRUCK, UTILITY - HUM-V |
| AHTC | FLANGE OUTSIDE DIAMETER | 2.948 INCHES MINIMUM AND 2.952 INCHES MAXIMUM |
| AMDM | FIRST END SPLINE LENGTH | 3.210 INCHES MINIMUM AND 3.250 INCHES MAXIMUM |
| AMGA | SECOND END SPLINE LENGTH | 3.210 INCHES MINIMUM AND 3.250 INCHES MAXIMUM |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 1.282 INCHES NOMINAL |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 1.375 INCHES NOMINAL |
| AMGF | SECOND END PITCH DIAMETER | 0.071 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| AMHF | SECOND END GEAR OUTSIDE DIAMETER | 1.375 INCHES NOMINAL |
| AMQA | FIRST END TYPE | FLANGED |
| AMQF | SECOND END TYPE | SPLINED |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 6 UNTHREADED HOLE |
| BNTH | SECOND END GEAR TEETH QUANTITY | 32 |
| BNTJ | SECOND END GEAR TEETH PRESSURE ANGLE IN DEG | 45.0 |
| BNTM | SECOND END SPLINE TYPE | INVOLUTE |
| BNTN | SECOND END SPLINE PRESSURE ANGLE IN DEG | 45.0 |
| BNYS | FLANGE OVERALL THICKNESS | 0.303 INCHES MINIMUM AND 0.355 INCHES MAXIMUM |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | ITEM FOR RIGHT HAND ONLY; SURFACE HARDNESS ROCKWELL C 58-63 - CORE HARDNESS ROCKWELL C 35 MAX; MAT'L FOR BOOT CLAMP - STAINLESS STEEL, TYPE 304 IAW ASTM A167 |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
