Are you in search of a reputable online distributor that can reliably source and ship top-notch military and defense parts, NSN parts, and aerospace parts? If so, we have you covered on Buy Mil-NSN Parts with our unrivaled inventory of offerings. Thank you for taking an interest in part number TRX18-6N1, a General Dynamics Global Imaging item that is listed alongside the description “Synchro Receiver Transmitter” and the NSN 5990009059556. If you would like to learn more about this particular listing, you can always take the initial step of the procurement process via the submission of the quote request form on this page.
Note : We Will Not Share Your Information To Any Third Parties.
We organize our offerings in a variety of ways to make the search process simple for part number TRX18-6N1 and other similar items. For instance, this General Dynamics Global Imaging product is listed alongside the NSN 5990-00-905-9556, and it falls under Federal Supply Class (FSC) 5990 Synchros and Resolvers. Furthermore, through our rigorous vetting processes, careful part inspections, document verification practices, and more, we have established ourselves as a trusted distributor operating with AS9120B, ISO 9001:2015, and FAA AC 00-56B accreditation. With all of this in mind, begin the procurement process for part number TRX18-6N1 from CAGE Code 10112 on our website, and see why so many customers steadily depend on Buy Mil-NSN Parts for the NSN products they require.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-00-905-9556 Item PartTypeName: SYNCHRO,RECEIVER-TRANSMITTER | 5990 | 009059556 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| 7 | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 18TRX6A | 1 | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | STEEL,STAINLESS |
| AAQL | BODY STYLE | STANDARD ROUND C |
| AAVH | SHOULDER DIAMETER | 1.5615 INCHES MINIMUM AND 1.5620 INCHES MAXIMUM |
| AAVL | PILOT DIAMETER | 0.9370 INCHES MINIMUM AND 0.9375 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 3.0600 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 1.7450 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 1.6250 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.1870 INCHES MINIMUM SINGLE SHAFT AND 0.1872 INCHES MAXIMUM SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.5400 INCHES NOMINAL SINGLE SHAFT |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHCG | MAXIMUM TEMP RISE | 40.0 DEG CELSIUS |
| AJSL | BODY SIZE | 18 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| AJSS | FREQUENCY IN HERTZ | 60.0 NOMINAL |
| AJST | ROTOR INPUT CURRENT RATING | 100.0 MILLIAMPERES MAXIMUM |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | 4.0 WATTS MAXIMUM |
| AJTN | ZSS IMPEDANCE MAGNITUDE IN OHMS | 350.00 MINIMUM AND 430.00 MAXIMUM |
| AJTP | ZSS IMPEDANCE ANGLE IN DEG | 18.00 MINIMUM AND 22.00 MAXIMUM |
| AJVF | PHASE SHIFT ANGLE IN DEG | 16.000 INPUT TO OUTPUT MAXIMUM |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 50.00 OUTPUT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 300.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0/6.0 |
| AJVM | SPLINE TOOTH QUANTITY | 21 SINGLE SHAFT |
| AJVN | RECEIVER ERROR ANGULAR RANGE IN MINUTES | -45.0/45.0 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | 0.050 INCH-OUNCES MINIMUM |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | 0.0400 INCHES NOMINAL |
| AJWR | SHOULDER LENGTH | 0.1320 INCHES NOMINAL |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.5200 INCHES NOMINAL |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 120 SINGLE SHAFT |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | UNF SINGLE SHAFT |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SINGLE SHAFT |
| AKAN | SHAFT THREAD CLASS | 2A SINGLE SHAFT |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | 0.2000 INCHES NOMINAL SINGLE SHAFT |
| CRSJ | SHAFT TYPE | SPLINE W/THREADS SINGLE SHAFT |
| CRSY | ALIGNMENT HOLE DEPTH | 0.1250 INCHES MINIMUM |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| CSJY | TRANSFORMATION RATIO | 0.783 STATOR TO ROTOR NOMINAL |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 1.2500 INCHES NOMINAL |
| CWBH | SHAFT NOMINAL THREAD SIZE | 0.190 INCHES SINGLE SHAFT |
| FEAT | SPECIAL FEATURES | STREAM (STD. TENSIONED REPLENISHMENT AT SEA METHOD) |
| TEST | TEST DATA DOCUMENT | 81343-AS20708 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTING G |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 SCREW |
| ZZZK | SPECIFICATION/STANDARD DATA | 81343-AS20708/35 PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
