Are you in search of a reputable online distributor that can reliably source and ship top-notch military and defense parts, NSN parts, and aerospace parts? If so, we have you covered on Buy Mil-NSN Parts with our unrivaled inventory of offerings. Thank you for taking an interest in part number LO-013425784, a Dla Land And Maritime item that is listed alongside the description “Switch Rotary” and the NSN 5930013425784. If you would like to learn more about this particular listing, you can always take the initial step of the procurement process via the submission of the quote request form on this page.
Note : We Will Not Share Your Information To Any Third Parties.
We organize our offerings in a variety of ways to make the search process simple for part number LO-013425784 and other similar items. For instance, this Dla Land And Maritime product is listed alongside the NSN 5930-01-342-5784, and it falls under Federal Supply Class (FSC) 5930 Switches. Furthermore, through our rigorous vetting processes, careful part inspections, document verification practices, and more, we have established ourselves as a trusted distributor operating with AS9120B, ISO 9001:2015, and FAA AC 00-56B accreditation. With all of this in mind, begin the procurement process for part number LO-013425784 from CAGE Code 16236 on our website, and see why so many customers steadily depend on Buy Mil-NSN Parts for the NSN products they require.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5930-01-342-5784 Item PartTypeName: SWITCH,ROTARY | 5930 | 013425784 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | G | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| M3786/4-6154 | 5 | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| FEAT | SPECIAL FEATURES | ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER COLUMBUS PRODUCTION STANDARD NO. LO4407 |
| ABNC | FLAT HEIGHT | 0.216 INCHES NOMINAL SINGLE ACTUATOR |
| ABWV | SHAFT DIAMETER | 0.248 INCHES MINIMUM SINGLE ACTUATOR AND 0.251 INCHES MAXIMUM SINGLE ACTUATOR |
| AFBH | INDIVIDUAL SECTION QUANTITY | 3 |
| AFGA | OPERATING TEMP RANGE | -65.0 TO 125.0 DEG CELSIUS |
| AJZE | SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| AKPY | THROW QUANTITY | 3 EACH SECTION REAR |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES SINGLE MOUNTING FACILITY |
| AAJD | THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| ABNB | FIRST FLAT LENGTH | 0.230 INCHES MINIMUM SINGLE ACTUATOR AND 0.270 INCHES MAXIMUM SINGLE ACTUATOR |
| AXGY | MOUNTING METHOD | THREADED BUSHING W/PANEL SEAL SINGLE MOUNTING FACILITY |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 0.03 DC AT SEA LEVEL |
| CQTH | ROTOR THROUGH CONNECTION QUANTITY | 1 EACH SECTION |
| CRJH | SWITCH ACTUATOR INDEXING POSITION QUANTITY | 3 SINGLE ACTUATOR |
| CRSJ | SHAFT TYPE | ROUND,FLATTED SINGLE ACTUATOR |
| CSCF | TERMINAL TYPE | TAB,SOLDER LUG |
| CSHW | CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION REAR |
| CSLC | SWITCH ACTUATOR POSITIONING INCREMENT | 90.0 DEGREES SINGLE ACTUATOR |
| CSMW | DETENT ROTATIONAL TORQUE RANGE | 0.500 TO 2.500 INCH-POUNDS SINGLE ACTUATOR |
| PMLC | PRECIOUS MATERIAL AND LOCATION | ROTOR AND CONTACT SURFACES GOLD |
| THSD | THREAD SERIES DESIGNATOR | UNEF SINGLE MOUNTING FACILITY |
| AASA | THREAD LENGTH | 0.417 INCHES MINIMUM SINGLE MOUNTING FACILITY AND 0.457 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| ABFE | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | EXPLOSION PROOF |
| ABHP | OVERALL LENGTH | 1.566 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.417 INCHES MINIMUM SINGLE ACTUATOR AND 0.457 INCHES MAXIMUM SINGLE ACTUATOR |
| ADAV | OVERALL DIAMETER | 1.000 INCHES MINIMUM AND 1.306 INCHES MAXIMUM |
| AFDC | NONTURN DEVICE TYPE | SLOTTED BUSHING AT 3:00 OCLOCK |
| AKPX | POLE QUANTITY | 1 EACH SECTION FRONT |
| CRTL | CRITICALITY CODE JUSTIFICATION | ZZZY |
| CTDN | SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP SINGLE ACTUATOR |
| CTHF | CONTACT LOAD CURRENT RATING | 10.0 MILLIAMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| PRMT | PRECIOUS MATERIAL | GOLD |
| STYL | STYLE DESIGNATOR | TAP,CIRCULAR,BUSHING MOUNT |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | BREFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL. MANUFACTURING AND TESTING SPECIFICATIONS AVAILABLE AT THE DLA ICP. |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
