INSTANT RFQ

Request a Quote on Part Number LE271-0045 by Boeing Company The Today!

Part Number: LE271-0045
Alternate P/N: LE2710045
Manufacturer: Boeing Company The
NIIN: 014864275
CAGE Code: 43999
FSG: 47 Pipe Tubing Hose and Fittings
Country: USA
NCB Code: 01

Are you in search of a reputable online distributor that can reliably source and ship top-notch military and defense parts, NSN parts, and aerospace parts? If so, we have you covered on Buy Mil-NSN Parts with our unrivaled inventory of offerings. Thank you for taking an interest in part number LE271-0045, a Boeing Company The item that is listed alongside the description “Hose Assembly Nonmetallic” and the NSN 4720014864275. If you would like to learn more about this particular listing, you can always take the initial step of the procurement process via the submission of the quote request form on this page.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

We organize our offerings in a variety of ways to make the search process simple for part number LE271-0045 and other similar items. For instance, this Boeing Company The product is listed alongside the NSN 4720-01-486-4275, and it falls under Federal Supply Class (FSC) 4720 Hose and Tubing Flexible. Furthermore, through our rigorous vetting processes, careful part inspections, document verification practices, and more, we have established ourselves as a trusted distributor operating with AS9120B, ISO 9001:2015, and FAA AC 00-56B accreditation. With all of this in mind, begin the procurement process for part number LE271-0045 from CAGE Code 43999 on our website, and see why so many customers steadily depend on Buy Mil-NSN Parts for the NSN products they require.

NSN Information for Part Number LE271-0045 with NSN 4720-01-486-4275, 4720014864275

NSNFSCNIINCLSHazmatDEMILCancelled NSN
4720-01-486-4275

Item PartTypeName:

HOSE ASSEMBLY,NONMETALLIC

47200148642750NA
CIICHCCESDPMICCriticalityENAC
UAA0
Part NumberISCRNVCRNCCHCCMSDSSADC
AE706417-0284525

Characteristics Data of NSN 4720-01-486-4275, 4720014864275

MRCCriteriaCharacteristic
AAGRCROSS-SECTIONAL SHAPE STYLEROUND"
AARXINSIDE DIAMETER1.026 INCHES NOMINAL"
ABJHTEMP RATING-65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 265.0 DEG FAHRENHEIT SINGLE RESPONSE"
ABKGBOLT CIRCLE DIAMETER1.230 INCHES NOMINAL 1ST END"
ABKGBOLT CIRCLE DIAMETER1.230 INCHES NOMINAL 2ND END"
ABKUFLANGE THICKNESS0.675 INCHES NOMINAL 1ST END"
ABKUFLANGE THICKNESS0.675 INCHES NOMINAL 2ND END"
ABKVOUTSIDE DIAMETER1.250 INCHES MINIMUM AND 1.560 INCHES MAXIMUM"
ACKHMINIMUM INSIDE BENDING RADIUS4.500 INCHES"
AECSBOLT HOLE QUANTITY5 1ST END"
AECSBOLT HOLE QUANTITY5 2ND END"
AEPRFLANGE OUTSIDE DIAMETER1.743 INCHES NOMINAL 1ST END"
AEPRFLANGE OUTSIDE DIAMETER1.743 INCHES NOMINAL 2ND END"
AGAVEND ITEM IDENTIFICATIONENVIRONMENTAL CONTROL SYSTEM COOLANT LINE"
AHNXBOLT HOLE DIAMETER0.035 INCHES MINIMUM 1ST END AND 0.040 INCHES MAXIMUM 1ST END"
AHNXBOLT HOLE DIAMETER0.035 INCHES MINIMUM 2ND END AND 0.040 INCHES MAXIMUM 2ND END"
AKUTEND FLANGE CONSTRUCTIONSOLID 1ST END"
AKUTEND FLANGE CONSTRUCTIONSOLID 2ND END"
AKUUEND CONNECTION DESIGNELBOW 1ST END"
AKUUEND CONNECTION DESIGNELBOW 2ND END"
AWLSCONNECTION TYPEPLAIN FACE FLANGE 1ST END"
AWLSCONNECTION TYPEPLAIN FACE FLANGE 2ND END"
CBBLFEATURES PROVIDEDELECTROSTATIC DISCHARGE CAPABILITY"
CQBDBURST TEST PRESSURE475.0 POUNDS PER SQUARE INCH"
CQCSLAYER COMPOSITION AND LOCATIONOUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE"
CQGMMAXIMUM OPERATING PRESSURE190.0 POUNDS PER SQUARE INCH"
CRDWHYDROSTATIC TEST PRESSURE285.0 POUNDS PER SQUARE INCH"
CRFYFLOW ANGLE108.0 DEGREES 2ND END"
CRFYFLOW ANGLE90.0 DEGREES 1ST END"
CRSMVACUUM IN TORR20.0"
CRWLINSIDE SURFACE CONDITIONSMOOTH"
CRXXMEASURING METHOD AND LENGTH18.000 INCHES NOMINAL WORKING"
CTCJFLANGE STYLEROUND W/ BOLT HOLES 1ST END"
CTCJFLANGE STYLEROUND W/ BOLT HOLES 2ND END"
FEATSPECIAL FEATURESFERRULE,SWAGE,TUBE COUPLINGS ON BOTH ENDS, THREADED EXTERNAL 1 3/4-12UN-2A, SLOTTED, P/N W83051-20"
AAGRCROSS-SECTIONAL SHAPE STYLEROUND"
AARXINSIDE DIAMETER1.026 INCHES NOMINAL"
ABJHTEMP RATING-65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 265.0 DEG FAHRENHEIT SINGLE RESPONSE"
ABKGBOLT CIRCLE DIAMETER1.230 INCHES NOMINAL 1ST END"
ABKGBOLT CIRCLE DIAMETER1.230 INCHES NOMINAL 2ND END"
ABKUFLANGE THICKNESS0.675 INCHES NOMINAL 1ST END"
ABKUFLANGE THICKNESS0.675 INCHES NOMINAL 2ND END"
ABKVOUTSIDE DIAMETER1.250 INCHES MINIMUM AND 1.560 INCHES MAXIMUM"
ACKHMINIMUM INSIDE BENDING RADIUS4.500 INCHES"
AECSBOLT HOLE QUANTITY5 1ST END"
AECSBOLT HOLE QUANTITY5 2ND END"
AEPRFLANGE OUTSIDE DIAMETER1.743 INCHES NOMINAL 1ST END"
AEPRFLANGE OUTSIDE DIAMETER1.743 INCHES NOMINAL 2ND END"
AGAVEND ITEM IDENTIFICATIONENVIRONMENTAL CONTROL SYSTEM COOLANT LINE"
AHNXBOLT HOLE DIAMETER0.035 INCHES MINIMUM 1ST END AND 0.040 INCHES MAXIMUM 1ST END"
AHNXBOLT HOLE DIAMETER0.035 INCHES MINIMUM 2ND END AND 0.040 INCHES MAXIMUM 2ND END"
AKUTEND FLANGE CONSTRUCTIONSOLID 1ST END"
AKUTEND FLANGE CONSTRUCTIONSOLID 2ND END"
AKUUEND CONNECTION DESIGNELBOW 1ST END"
AKUUEND CONNECTION DESIGNELBOW 2ND END"
AWLSCONNECTION TYPEPLAIN FACE FLANGE 1ST END"
AWLSCONNECTION TYPEPLAIN FACE FLANGE 2ND END"
CBBLFEATURES PROVIDEDELECTROSTATIC DISCHARGE CAPABILITY"
CQBDBURST TEST PRESSURE475.0 POUNDS PER SQUARE INCH"
CQCSLAYER COMPOSITION AND LOCATIONOUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE"
CQGMMAXIMUM OPERATING PRESSURE190.0 POUNDS PER SQUARE INCH"
CRDWHYDROSTATIC TEST PRESSURE285.0 POUNDS PER SQUARE INCH"
CRFYFLOW ANGLE108.0 DEGREES 2ND END"
CRFYFLOW ANGLE90.0 DEGREES 1ST END"
CRSMVACUUM IN TORR20.0"
CRWLINSIDE SURFACE CONDITIONSMOOTH"
CRXXMEASURING METHOD AND LENGTH18.000 INCHES NOMINAL WORKING"
CTCJFLANGE STYLEROUND W/ BOLT HOLES 1ST END"
CTCJFLANGE STYLEROUND W/ BOLT HOLES 2ND END"
FEATSPECIAL FEATURESFERRULE,SWAGE,TUBE COUPLINGS ON BOTH ENDS, THREADED EXTERNAL 1 3/4-12UN-2A, SLOTTED, P/N W83051-20"

Related NSN Components of LE271 0045

Part LE271-0045 With Different Manufacturers

A Complete NSN Part Purchasing Platform

  • AS9120B and ISO 9001:2015 Certified
  • Aviation Suppliers Association Member
  • FAA AC 0056B Accredited
  • AS 6081:2012 Certified
  • ESD S20.20-2014 Certified

Thank You for Visiting.

If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top