Are you in search of a reputable online distributor that can reliably source and ship top-notch military and defense parts, NSN parts, and aerospace parts? If so, we have you covered on Buy Mil-NSN Parts with our unrivaled inventory of offerings. Thank you for taking an interest in part number 1601, a Bei Sensors And Systems Company Inc item that is listed alongside the description “Resistor Variable Wire Wound Pre” and the NSN 5905000189870. If you would like to learn more about this particular listing, you can always take the initial step of the procurement process via the submission of the quote request form on this page.
Note : We Will Not Share Your Information To Any Third Parties.
We organize our offerings in a variety of ways to make the search process simple for part number 1601 and other similar items. For instance, this Bei Sensors And Systems Company Inc product is listed alongside the NSN 5905-00-018-9870, and it falls under Federal Supply Class (FSC) 5905 Resistors. Furthermore, through our rigorous vetting processes, careful part inspections, document verification practices, and more, we have established ourselves as a trusted distributor operating with AS9120B, ISO 9001:2015, and FAA AC 00-56B accreditation. With all of this in mind, begin the procurement process for part number 1601 from CAGE Code 11534 on our website, and see why so many customers steadily depend on Buy Mil-NSN Parts for the NSN products they require.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5905-00-018-9870 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 000189870 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
1601 | 2 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAPN | SECTION QUANTITY | 2 |
AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
AAVL | PILOT DIAMETER | 1.5610 INCHES MINIMUM AND 1.5620 INCHES MAXIMUM |
AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL |
ABHP | OVERALL LENGTH | 2.498 INCHES NOMINAL |
ABPA | UNDERCUT DIAMETER | 1.562 INCHES MAXIMUM |
ABPC | UNDERCUT WIDTH | 0.0730 INCHES NOMINAL |
ABPM | BODY DIAMETER | 1.740 INCHES MINIMUM AND 1.760 INCHES MAXIMUM |
ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL |
ABXF | SHAFT LENGTH | 0.907 INCHES MINIMUM AND 0.969 INCHES MAXIMUM |
ADAQ | BODY LENGTH | 1.560 INCHES MAXIMUM |
ADAV | OVERALL DIAMETER | 2.186 INCHES MAXIMUM |
AECZ | MOUNTING LIP DIAMETER | 1.7400 INCHES MINIMUM AND 1.7600 INCHES MAXIMUM |
AEDA | MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL |
AEDX | SHAFT STYLE | ROUND,SLOTTED |
AEDZ | SHAFT BEARING TYPE | BALL |
AEFD | ACTUATOR TYPE | SINGLE SHAFT |
AEFK | MAXIMUM STARTING TORQUE | 1.40 INCH-OUNCES |
AEFL | MAXIMUM RUNNING TORQUE | 0.80 INCH-OUNCES |
AEFM | MAXIMUM STOP TORQUE | 128.00 INCH-OUNCES |
AEFY | SHAFT END PLAY | 0.0025 INCHES |
AEFZ | SHAFT RUNOUT | 0.001 INCHES |
AEGA | LATERAL RUNOUT | 0.001 INCHES |
AEGB | PILOT DIAMETER RUNOUT | 0.0015 INCHES |
AEGC | SHAFT RADIAL PLAY | 0.001 INCHES |
AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 1.0 |
APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
AXGY | MOUNTING METHOD | CLAMP RING |
CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS ALL SECTIONS |
CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 333.0 NOMINAL |
CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00 TO 1.00 ALL SECTIONS |
CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 ALL SECTIONS |
CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.1 FREE AIR ALL SECTIONS |
CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE CONFORMITY |
CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/5.0 ALL SECTIONS |
CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS TABLE |
CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 ALL SECTIONS |
TEST | TEST DATA DOCUMENT | 18876-10132431 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
TTQY | TERMINAL TYPE AND QUANTITY | 6 TURRET |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote