Are you in search of a reputable online distributor that can reliably source and ship top-notch military and defense parts, NSN parts, and aerospace parts? If so, we have you covered on Buy Mil-NSN Parts with our unrivaled inventory of offerings. Thank you for taking an interest in part number BJBN05FC-028, a Barden Corporation item that is listed alongside the description “Bearing Sleeve” and the NSN 3120013357174. If you would like to learn more about this particular listing, you can always take the initial step of the procurement process via the submission of the quote request form on this page.
Note : We Will Not Share Your Information To Any Third Parties.
We organize our offerings in a variety of ways to make the search process simple for part number BJBN05FC-028 and other similar items. For instance, this Barden Corporation product is listed alongside the NSN 3120-01-335-7174, and it falls under Federal Supply Class (FSC) 3120 Bearings Plain Unmounted. Furthermore, through our rigorous vetting processes, careful part inspections, document verification practices, and more, we have established ourselves as a trusted distributor operating with AS9120B, ISO 9001:2015, and FAA AC 00-56B accreditation. With all of this in mind, begin the procurement process for part number BJBN05FC-028 from CAGE Code 70854 on our website, and see why so many customers steadily depend on Buy Mil-NSN Parts for the NSN products they require.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3120-01-335-7174 Item PartTypeName: BEARING,SLEEVE | 3120 | 013357174 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 04A061-05-028 | 5 | 2 | 1 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ADAR | BODY OUTSIDE DIAMETER | 0.4381 INCHES MINIMUM AND 0.4387 INCHES MAXIMUM |
| AGFF | FLANGE WIDTH | 0.0570 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM |
| BZLX | CORNER SHAPE | CHAMFERED INSIDE RIGHT CORNER |
| BZLX | CORNER SHAPE | SQUARE INSIDE LEFT CORNER |
| BZLX | CORNER SHAPE | SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER |
| BZLX | CORNER SHAPE | UNDERCUT LEFT FLANGE BODY CORNER |
| CQFM | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM RIGHT END SURFACE OF BODY AND 37.0 ROCKWELL C MAXIMUM RIGHT END SURFACE OF BODY |
| CQFM | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM RIGHT END SURFACE OF LEFT FLANGE AND 37.0 ROCKWELL C MAXIMUM RIGHT END SURFACE OF LEFT FLANGE |
| MATT | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE INSIDE DIAMETER SURFACE OF BODY AND PLASTIC POLYAMIDE INSIDE DIAMETER SURFACE OF BODY AND PLASTIC PHENOLIC INSIDE DIAMETER SURFACE OF BODY |
| MATT | MATERIAL | STEEL COMP 630 RIGHT END SURFACE OF BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OUTSIDE DIAMETER SURFACE OF BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OUTSIDE DIAMETER SURFACE OF FLANGE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE RIGHT END SURFACE OF LEFT FLANGE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-B-81934 MIL SPEC SINGLE MATERIAL RESPONSE INSIDE DIAMETER SURFACE OF BODY |
| ZZZK | SPECIFICATION/STANDARD DATA | 50632-04A061 MANUFACTURERS STANDARD |
| ABHP | OVERALL LENGTH | 0.3420 INCHES NOMINAL |
| AEPR | FLANGE OUTSIDE DIAMETER | 0.7200 INCHES MINIMUM AND 0.7400 INCHES MAXIMUM |
| BZLX | CORNER SHAPE | SQUARE OUTSIDE RIGHT CORNER |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY |
| MATT | MATERIAL | STEEL COMP 630 LEFT END SURFACE OF BODY AND FLANGE |
| BZLX | CORNER SHAPE | SQUARE OUTSIDE LEFT CORNER |
| CQFM | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM OUTSIDE DIAMETER SURFACE OF BODY AND 37.0 ROCKWELL C MAXIMUM OUTSIDE DIAMETER SURFACE OF BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE LEFT END SURFACE OF BODY AND FLANGE |
| STYL | STYLE DESIGNATOR | SOLID,EXTERNAL FLANGE ONE END |
| ADAS | BODY INSIDE DIAMETER | 0.3020 INCHES MINIMUM AND 0.3030 INCHES MAXIMUM |
| CQFM | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM LEFT END SURFACE OF BODY AND FLANGE AND 37.0 ROCKWELL C MAXIMUM LEFT END SURFACE OF BODY AND FLANGE |
| CQFM | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM OUTSIDE DIAMETER SURFACE OF FLANGE AND 37.0 ROCKWELL C MAXIMUM OUTSIDE DIAMETER SURFACE OF FLANGE |
| CSYM | SURFACE FINISH | 16.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE |
| MATT | MATERIAL | STEEL COMP 630 OUTSIDE DIAMETER SURFACE OF BODY |
| MATT | MATERIAL | STEEL COMP 630 OUTSIDE DIAMETER SURFACE OF FLANGE |
| MATT | MATERIAL | STEEL COMP 630 RIGHT END SURFACE OF LEFT FLANGE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE RIGHT END SURFACE OF BODY |
If You’re Ever Looking for NSN parts Or Have an Aircraft On Ground Situation, Don’t forget That We offer Competitive Pricing and Guaranteed On-Time Delivery.
Request for Quote
