| MRC | Criteria | Characteristic |
|---|
| CPRN | ULTIMATE TRIP RATING OF CONTINUOUS CURRENT RATING PER POLE IN PERCENT | 135.0 ALL LOCATIONS |
| CQJX | NOMINAL THREAD SIZE | 0.138 INCHES |
| CPRQ | RESET METHOD | MANUAL |
| CBBL | FEATURES PROVIDED | HIGH INRUSH PROTECTION |
| FEAT | SPECIAL FEATURES | TEMP RANGE M40.0 TO 185.0 FAH. TESTED IAW MIL-STD-202 METHODS 101, 106, 103 COND A, 213 COND I, 204, 301, 302. |
| FREQ | FREQUENCY IN HERTZ | 50.0 OR 60.0 ALL LOCATIONS |
| AKPX | POLE QUANTITY | 2 |
| ADAT | BODY WIDTH | 1.469 INCHES MINIMUM AND 1.531 INCHES MAXIMUM |
| ADTV | CASE MATERIAL | PLASTIC |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | CIRCUIT BREAKER |
| CPRH | CIRCUIT PROTECTION TYPE | OVERCURRENT ALL LOCATIONS |
| CPLM | MAXIMUM CONTINUOUS LOAD CURRENT RATING PER POLE | 20.0 AMPERES AC AND 20.0 AMPERES DC ALL LOCATIONS |
| CPRL | TRIP RELEASE CHARACTERISTIC | TIME DELAY ALL LOCATIONS |
| CPRF | OPERATING VOLTAGE TYPE AND RATING PER POLE IN VOLTS | 240.0 AC AND 80.0 DC ALL LOCATIONS |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM |
| AEBQ | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH | 0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM |
| CPRR | MAIN CONTACT TRIPPING MECHANISM TYPE | TRIP FREE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 THREADED STUD |
| CPRT | MANUAL ACTUATOR TYPE AND QUANTITY | 2 TOGGLE |
| AAQL | BODY STYLE | MULTIPOLE-MULTIPLE ACTUATOR TYPE |
| CPRW | ACTUATOR FUNCTION | TRIP-RESET |
| CPRX | ACTUATOR POSITION DESIGNATION | AT EACH POLE |
| AJEC | BOSS HEIGHT | 0.109 INCHES MINIMUM AND 0.171 INCHES MAXIMUM |
| CPRY | EXTERNAL ACTUATOR LINKAGE ARRANGEMENT | ONE AND TWO LINKED |
| THSD | THREAD SERIES DESIGNATOR | UNC |
| CPRG | MAXIMUM INTERRUPTING CAPACITY CURRENT TYPE AND RATING PER POLE IN AMPS | 5000.0 AC AND 5000.0 DC ALL LOCATIONS |
| CPSM | INTERNAL TRIP RELEASE CONFIGURATION | SERIES TRIP ALL LOCATIONS |
| CQWN | TRIP DELAY TIME IN SECONDS PER RATED CONTINUOUS CURRENT | 1.700 MINIMUM AT 200 PCT AND 18.000 MAXIMUM AT 200 PCT ALL LOCATIONS |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 1.909 INCHES MINIMUM AND 1.971 INCHES MAXIMUM |
| CPRJ | TRIP RELEASE METHOD | MAGNETIC-HYDRAULIC ALL LOCATIONS |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.829 INCHES MINIMUM AND 1.891 INCHES MAXIMUM |
| AGAV | III END ITEM IDENTIFICATION | MISSLE, MINUTEMAN LGM-30, TEST SET |
| ADAQ | BODY LENGTH | 2.469 INCHES MINIMUM AND 2.531 INCHES MAXIMUM |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 2.031 INCHES MINIMUM AND 2.093 INCHES MAXIMUM |
